麻豆传媒在线

Skip Navigation

Automotive

Fuel Reliability for Transportation Heating Systems Tigerloop庐 Fuel De-Aerator: Trusted by the Automotive Industry

Maintaining consistent fuel delivery is critical in the automotive and transport sectors, especially for auxiliary heaters in buses, trains, workboats, motorhomes and other vehicles operating in cold conditions. The Tigerloop Fuel De-Aerator provides a reliable solution for maintaining performance in these demanding environments.

Why De-Aeration Matters for Auxiliary Heaters

Without a fuel de-aerator, air and gas bubbles enter the fuel supply. These seemingly minor interruptions can lead to significant challenges:

  • Heater lockouts and system failures
  • Increased fuel consumption
  • Soot buildup and poor combustion
  • Nozzle dripping and inefficient shutdowns
  • Elevated maintenance and repair costs

Whether you are running public transportation in extreme cold or powering off-grid equipment in remote locations, air bubbles in diesel, heating oil or biofuel systems reduce operational efficiency and reliability. The Tigerloop Fuel De-Aerator eliminates this problem automatically and continuously.

Tigerloop: Purpose-Built for Mobile Applications

麻豆传媒在线 developed the Tigerloop Auto and Auto Plus 2 specifically for transport-based auxiliary heating systems. These compact units work seamlessly utilizing a two-pipe system between the burner pump and the Tigerloop but only a single-pipe between the tank and the Tigerloop, removing risks associated with a pressurized return line to the tank. Here are some key advantages:

  • Air-free fuel delivery: De-aerates fuel before it reaches the burner, preventing nozzle and pump issues
  • More efficient combustion: Reduces soot, smoke and fuel waste
  • Cleaner operation: Extends filter life and protects fuel quality
  • No return line required: Simplifies installation and reduces risk of leakage
  • Quiet performance: Minimizes noise from pumps and gear sets
  • Cold-weather ready: Recirculation pre-warms fuel to reduce cold-start issues

Applications

  • Buses, trains and mass transit vehicles
  • Workboats and marine vessels
  • Motorhomes and RVs

A Smarter, Safer System Design

Traditional two-pipe systems recirculate up to 20x more fuel than is actually burned, pulling contaminants through the system and risking return-line failure. Tigerloop simplifies to a single-pipe layout, pulling only the amount of fuel required for combustion. This approach:

  • Reduces installation cost
  • Minimizes fuel degradation
  • Improves environmental safety
  • Complies with growing regulatory demands

Certified Performance

Every Tigerloop undergoes a 12-hour leak-tightness test and is produced under ISO 9001 certified quality systems. The result is consistent, durable performance in demanding mobile applications.

Solve These Common Problems with Tigerloop

  • Air in the fuel supply causing burner lockouts
  • Inconsistent heat in cold conditions
  • Dripping nozzles and sooty shutdowns
  • Shortened lifespan of pumps and filters

Ready to stabilize your auxiliary heaters and cut unplanned downtime? Explore Tigerloop Fuel De-Aerators and see model specifics for transport heating systems.

Frequently Asked Questions

听

听

A fuel de-aerator removes air and gases from the fuel before it reaches the burner or pump. Tigerloop庐 automatically and continuously de-aerates the fuel upstream, so only air-free fuel reaches the heater, which stabilizes combustion and prevents nuisance lockouts.

听

听

Mobile heaters face long or elevated suction lines and cold conditions. These factors release gas/air bubbles into the fuel stream, which drive breakdowns, soot buildup, lower efficiency and higher fuel use. Tigerloop targets this exact risk in auxiliary heater lines for buses, trains, motorhomes, workboats and diesel generators.

听

听

You will see unstable pressure, noisy operation, nozzle drip on shutdown, soot, clogged filters and eventual heater lockouts. Tigerloop stops the bubbles before they reach the pump and nozzle, avoiding poor cut-off and smoky shutdowns.

听

听

Two-pipe systems move high volumes of fuel back to the tank鈥攗p to 20 times more than is burned鈥攚hich drags contaminants through the system and does not stop bubbles from reaching the nozzle. Tigerloop enables a single-pipe approach that pulls only what is needed for combustion, cutting contamination risk and eliminating the return line.

听

听

听

Yes. By keeping fuel air-free, combustion is steadier and cleaner, which reduces soot and fuel use while helping your heater run at design efficiency. Customers also see longer filter life and preserved fuel quality because excess circulation is reduced.

听

听

Yes. In single-pipe mode, recirculation between Tigerloop and the pump pre-warms the fuel, which reduces issues associated with cold fuel and supports reliable starts in low temperatures.

听

听

Tigerloop de-aerates fuel lines feeding auxiliary heaters in buses, trains, motorhomes, workboats and diesel generators. A dedicated Tigerloop Auto model addresses the needs of mobile systems.

听

听

Tigerloop brings more than 50 years of experience and has been installed in over 8 million heating systems worldwide, meeting rising demands for environmental safety, cost savings and reliability.

听

听

Every Tigerloop unit undergoes a 12-hour tightness test to ensure it is 100 percent leak-tight, and manufacturing is certified to ISO 9001. This process gives operators confidence when uptime matters.

听

听

For mobile environments, Tigerloop Auto Plus 2 integrates a spin-on filter and heavy-duty bracket. Fewer connections simplify installation and reduce leakage risk.

听

麻豆传媒在线